Mingda MD-400D
Large High Temperature IDEX 3D Printer
Ideal choice for 2 colors, 2 materials and mass production printing
Dual Extruders Working Independently
The dual extruders on the MD-400D work independently and are not bundled, allowing for flexible and precise control. When using only one extruder, the other extruder is moved away from the print area to prevent unvanted filament overflow onto the printed object. However, the extruders can also work simultaneously and independently if higher productivity is required.
10 advantages
- 350 degrees direct extruder
- IDEX System
- Dual colors & Dual Materials Mode
- Duplicate & Mirror Mode
- Fully Enclosed Metal Structure
- Air Filtration System
- Removable PEI Plate
- Auto Leveling System
Four printing modes
- Duplicate Mode
- Equivalent to 2 printers working, achieve double productivity
- Mirror Mode
- Support printing symmetrical models while saving half the time
- Support Mode
- Print complex structural models, complex models can also be printed smoothly and with high precision
- Dual-Color Mode
- Allows printing different parts of a model in 2 colors
Two temperature modes to meet different material requirements
MD-400D is a flexible, high performance and commercial industrial 3D printer. It's equipped with two types of extruders, therefore various printing needs can be met selecting the matching module according to different types of filaments.
- Extruder HT - 350ºC
- PET-CF
- PA-CF 25
- PA-CF
- PET-GF
- PA-GF 25
- PA-GF
- ABS-GF 25
- HtPA-CF
- S-Mulit
- ABS-CF 20
- HtPA-GF
- S-HtPA
- Extruder N - 250ºC
- PLA
- PETG
- TPU-95A
- ABS
- PVA
Large build volume
Printing size: 400x400x400mm
meets most prototype printing needs
Free leveling
The automatic leveling system geatly improves printing efficiency and quality stability. It helps to reduce failed prints caused by an unleveled build plate. The precise calibration of nozzle distance also enables 3D printers to print models with finer layer resolution.
Fully Metal Enclosed Structure
The fully enclosed structure the MD-400D helps maintain temperatures printing with ABS and other advanced materials for high-quality prints. This reduces issues like model shrinkage, warping at conners, and broken filaments, ensuring good print results, high precision, and a high success rate.
Flexible PEI Platform
With good viscosity, the model is not easy to warp during the printing process and easy to remove after finished printing.
Air filtration system
During the printing process, the air filtration system can effectively clean particles (including manoparticles) in the air. The system operates silently to ensure a quiet working environment.
Smart Resume Printing Function
The machine can automatically resume printing after power-off, less worries on print failure.
Double Gears Direct Extruder
Double gears direct extruder with strong pushing force for more stable & accurate printing greatly reduces the risk of under extrusion.
5 inch Colorful Touch Screen
Large screen, simple operation
Automatic filament detection
It will pause the printing process if the filament run out, or if the filament is broken
Compatible with various filaments
- Common filament: PLA, ABS, TPU, PETG, ASA, etc
- Engineering filament: HtPA, PET-GF, PET-CF, PA12-CF, HTPA-GF, HTPA-CF, ABS-GF25, ABS-CF20, PA-GF25, PA-CF25, etc
- Support filament: S-Mulit, S-HtPA, PVA, etc
Application
- For manufacturing application and design prototype verification
- New product design and development
- Breakaway support filament
- Much easier to remove the support, the supported surface comes out clean and smooth
- Soluble support filament
- Printing complex models with internal geometries and hollow structures is made possible by using water-soluble filament
- Small batch production
- 3D printing farm & worshop
- Duplicate Mode and Mirror Mode That Double Productivity
Product parameters
- Printing
- Printing technology: FDM
- Print Volume: 400x400x400mm
- Duplicate mode: 400(2x200)x400x400mm
- Mirror mode: 350(2x175)x400x400mm
- Extruder type: IDEX
- Nozzle diameter: 0.4mm (0.6mm, 0.8mm, opcional)
- Filament diameter: 1.75mm
- Electrical
- Power Requirements: 100/240V-50/60Hz
- Rated power: 700W
- Extruder: 80W
- Hot Bed: 500W
- Connectivity: USB-C, Cartão SD, Pen USB
- Special function
- Out of Filament reminder: sim
- Resume printing after power failure: sim
- Air filter: sim
- Build plate leveling: auto nivelamento
- Temperature
- Extruders temperature: ≤350ºC
- Platform temperature: ≤110ºC
- Speed
- Recommend Printing Speed: 60-100 mm/s
- Max printing speed.: 200mm/s
- Mechanical
- Print precision: ± 0.1mm
- Platform: PEI
- Package Weight: 112.5kg
- Package Size: 82x72x108cm
- Software
- Support softwares: MINGDA-Cura, Reptier-Host, Simplify 3D
- Support file type: STL, OBJ, G-code
- Operating sustems: Windows (7,8,10), Mac OS X